Car Racks

The DoubleDown 4 securely transports four bikes in Yakima's easily-adjusted, anti-swing cradles with sturdy straps. In addition to carrying standard frames, the cradles are specially shaped to be compatible with non-standard and full suspension frames. When you're not carrying bikes, the arms drop down with a large, easy-to-grab trigger, and the tilt-down mast allows easy trunk access.

Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear–from skis and snowboards to boats and surfboards. It installs in minutes–just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope

Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2. - Includes 2 FatStraps to carry two fat bikes? - Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 6 pairs of skis or 4 snowboards Technical specifications - Dimensions: 34.2 x 2.8 x 3.9 inch - Loading width: 29.5 inch

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference - Carries up to 4 bikes with Thule T2 Pro XT Add-On (sold separately, 9036XTB, 2" receiver only)

The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Unique hidden pin cylinder for added security - Fits 2" only equipped racks - Threaded

Adapt your Swagman bike rack to accommodate fat bikes with wheel holders that fit extra-wide tires. - For use with Swagman's XTC 2 & XTC 4 bike racks - XTC 2 & XTC 4 Fat Bike Wheel Holder (set) 1 left, 1 right wheel holder

Swagman's most versatile and popular XTC2 bike rack, now with a tilting feature so you can access the rear of your vehicle. A great solution for carrying 1-2 bikes with the secure mounting capabilities of a platform style rack, now with a tilting feature. The XTC2 Tilt hitch-mounted bike rack comes complete with a 1-1/4" receiver bar and a 2" adapter plate, allowing it to easily fit most hitches. The foam-padded hooks help protect the bike frame while using an easily adjustable push button ratcheting system to stabilize and secure the bikes into the wheel hoops that accommodate wheels up to 2.5" wide. This lightweight, easy-to-assemble system, supports most frame sizes, folds into clamshell shape when not in use and tilts away from your vehicle. - Transports up to 2 bikes - Max Load: 35lbs per bike - Fits 20" - 29" wheel sizes - Center arm folds down to allow access to the rear of vehicle without removing the rack - Rack tilts away from the vehicle to allow access while bikes are still loaded - Locking Hitch Pin, Cable, and Fat Tire Trays sold separately - Rack Weight: 30lbs

What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Protect your rides

- Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Soft lining on the truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - Specifically designed for pickup trucks with curved tailgates - ML, Fits tailgates 130cm/50'' wide - XL, Fits tailgates 160cm/60'' wide

Coupler for 1-7/8 " balls for RACKandROLL trailer.

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Yakima's 1A HighRise Spacers convert their standard 1A RainGutter Towers (sold separately) into HighRise towers for more clearance. They give a rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks).

Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty

End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.

Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty

Go sleek with this low-profile t-slot awning bracket and mount up your awning with more options. This hardware kit replaces the standard mounting hardware of your awning and gives you multiple height settings to help you dial in your preferred look, including a rear deploy option. Product Details - ?Configurable in multiple height settings to allow a custom position on your vehicle. - T-slot design for easy attachment to Yakima HD Bar, JetStream, LockNLoad Platform and other standard t-slot crossbars - Rear deploy compatible with SlimShady 4.5 on a LockNLoad platform or HD Bar - Heavy-duty steel construction with durable, powder-coated finish - Compatible with all Yakima SlimShady awnings Product Specs - Weight: 3.78 lbs. - Dimensions: L 5.75 in x W 3.25 in x H 4.65 in

Don't get stuck in the mud without the right tools. This bracket hooks to your LoadWarrior or MegaWarrior basket so you can secure an axe or shovel while maximizing space and keeping the interior of your vehicle clean. Can you dig it? - Secures a single axe or shovel on your LoadWarrior or MegaWarrior basket Product Specs: - Weight: 1.82 lbs. - Dimensions: L 4.20 in x W 2.00 in x H 1.69 in - Limited Lifetime Warranty

Whether you're going on a cross country family road trip or heading out for a bike-friendly weekend, the BackRoad is your take-it-easy answer. With increased bike spacing, the BackRoad makes it easy to pack more bikes with a lot less hassle. Cradles and pads provide a snug and protected fit, while fully removable ZipStrips make loading a breeze. An SKS bike locking system is included to give you some peace of mind on your travels. Product Details - 7" spacing between bikes for easier loading - Soft cradle pads for added bike protection - Side to side cradle rotation for a better bike fit - Anti-sway cradles eliminate bike-to-bike contact - Mast tilts down for easy hatch access - Integrated SKS locking cable locks bikes to rack - ZipStrips secure bikes to the rack and are fully removable - Arms fold down when not in use - 37.5lb weight maximum per bike - Fits 1.25" and 2" hitch receiver - Integrated Yakima bottle opener - Carries up to 2 bikes. Also available in a 4 bike capacity - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Weight: 31.21 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty

Whether you're going on a cross country family road trip or heading out for a bike-friendly weekend the BackRoad is your take-it-easy answer. With increased bike spacing, the BackRoad makes it easy to pack more bikes with a lot less hassle. Cradles and pads provide a snug and protected fit, while fully removable ZipStrips make loading a breeze. An SKS bike locking system is included to give you some peace of mind on your travels. Product Details - 7" spacing between bikes for easier loading - Soft cradle pads for added bike protection - Side to side cradle rotation for a better bike fit - Anti-sway cradles eliminate bike-to-bike contact - Mast tilts down for easy hatch access - Integrated SKS locking cable locks bikes to rack - ZipStrips secure bikes to the rack and are fully removable - Arms fold down when not in use - 37.5lb weight maximum per bike - Fits 1.25" and 2" hitch receiver - Integrated Yakima bottle opener - Carries up to 2 bikes. Also available in a 4 bike capacity - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Weight: 31.21 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Specifically tailored to fit the SkyRise mattress, these soft sheets let you bring the comforts of home on your next rooftop camping adventure. The cozy 300 thread count sheets come as a set - fitted, flat, 2 pillowcases - and are made of 100% GOTS certified organic cotton. The fitted sheet won't budge during the night and the top sheet's pocketed end makes for easy bed making in the morning. Plus, you can leave them on your SkyRise mattress when you take down camp and hit the road. Product Details: - Sheet set specifically tailored to fit the Small SkyRise rooftop tent mattress - Full sheet set, including fitted sheet, flat sheet, and 2 standard pillowcases - 300 thread-count sheets are made of soft, comfortable 100% GOTS certified organic cotton - No tuck design on the flat sheet makes for easy bed making in the morning - Includes drawstring bag for easy storage away from camp Product Specs: - Weight: 3.30 lbs - Dimensions: L 84.00" x W 48.00" x H 3.00"

This simple kit easily adapts our OverHaul HD and OutPost HD truck rack systems to work seamlessly with Toyota and Nissan factory utility tracks—without sacrificing the rack's 500-lb. on-road carry capacity or its exclusive new 300-lb. Yakima Off-Road Rating. - Complete kit that works on all Toyota and Nissan trucks with factory utility tracks - Designed specifically for OverHaul HD and OutPost HD truck rack systems - Built to last with aluminum and corrosion-resistant hardware - Maintains both OverHaul HD and OutPost HD 500-lb. on-road and 300-lb. off-road ratings Product Specs: - Weight: 10.00 lbs. - Dimensions: L 15.00 in x W 1.50 in x H 4.00 in - Limited Lifetime Warranty